INDEX Description Setting the options Quick start! Phone connections Recorder connections Power Record a call Routine installation Voice terminal connections Audio to recorder Power Beep tone Installing the switch hook lead Output jack Applications Specifications	M6500P v5 RECORDER INTERFACE MODULE comcode: 406 631 739 pec code: 8807-006

Description

The M6500Pv5 recorder interface module provides an analog audio output of voice communications for recording purposes. It is designed to operate with 6500 and similar series voice terminals that use "K" type handsets. The M6500Pv5 produces a "beep tone" to remind the callers that the line is being recorded. An output closure allows remote switching of external devices. Easy to set dip switches control the output level, beep tone, and switch hook logic.

Setting the options

The options on the M6500Pv5 are set by a 3 position dip switch. The factory default settings are: 1 on; 2 on; 3 off.

OPTION	SWITCH NUMBER	SETTING	RESULT OR FUNCTION
OUTPUT LEVEL	1	OFF	MICROPHONE LEVEL
		ON	TELEPHONE LEVEL
BEEP TONE	2	OFF	INACTIVE
		ON	ACTIVE
SWITCH HOOK	3	OFF	POSITIVE or NO INPUT
		ON	NEGATIVE INPUT
FACTORY DEFAULTS ARE SHOWN IN BOLD
End view of the M6500pv5. Note the default option switch settings.

Quick start!

Check that the factory defaults are still set. From LEFT to RIGHT the switches should be set as: down, down, up. Toggle the switches up or down as required to match this configuration.

• Phone connection

  Unplug the handset cord from the voice terminal and insert it in the modular handset jack on the M6500Pv5. Connect the "pigtail" from the M6500Pv5 to the handset jack on the voice terminal.

• Recorder connection

  Connect a D8W modular cord to the output jack on the M6500Pv5. Connect pair 1 of this cable to the appropriate input jack of the recorder, such as a "MIC" or "LINE" input.

• Power

  Connect the AC adapter to the POWER jack on the M6500Pv5.

• Record a call

  Set the recorder to record. Place a call as normal. An audible beep should be heard every 12-15 seconds. When the call is complete, turn off the recorder. Verify that a recording has been made.