![]() |
|
The M8000 RIM is designed for use with the following Avaya voice terminals:
The M8000 produces a beep tone audible to both parties for recording notification. The beep tone is a 200ms 1400Hz tone burst every 12-15 seconds.
The options on the M8000 are selected by a 2 position dip switch located in the end of the unit.

Option switch 1 on the left controls the beep tone.
Option switch 2 controls the output level.
The factory default settings are:
The M8000 connects in series with your voice terminal's handset.
The audio output jack on the M8000 is a RJ-11 modular type. It connects to a high impedance recorder input. For desktop recorders use the MA8 patch cord supplied with the M8000.
Set the recorder to record. Place a call as normal. An audible beep should be heard in the handset approximately every 12-15 seconds. When the call is complete, turn off the recorder. Verify that a good recording has been made.
Even if you do not intend to use the beep tone, leaving it on is a good way to verify the installation. Going off hook even without dialing will produce a beep tone every 12 seconds that is audible both in the handset and on the recorder. Once satisfied with the installation, disable the beep tone if it is not required.
M8000 ![]() |
||
| GENERAL | Size | 3.2"L x 1.8"W x .775"H |
| Weight | 2.46oz | |
| Operating voltage | 5vdc | |
| Power consumption | 0.5mA | |
| AUDIO | Beep tone | 1400Hz; 200ms burst; 12-15 sec. interval |
| Insertion loss | Less than .5dB | |
| Audio output | Mic level: 10dB Loss (+-1dB) Telephone level: 0dB Loss (+-1dB) |
|
| INCLUDED ITEMS | 1ea. MA8 Patch cord | 6ft. length, 1/8" mini-phone plug to RJ11 modular plug. |
![]() |
![]() |