HOME > PRODUCTS > PRODUCT LIST > PALC-1000 :: page 2 of 2
Avaya PALC-1000
Installation
The PALC-1000 fits a standard type 10 shelf. Wire connections to either the 8-pin modular jacks on the front of the card or to the 56-pin card-edge connector.
Operation
The PALC-1000 circuit card generates autovon tones on an outgoing call and filters precedence wink signals on incoming calls. With the PALC-1000 wired into the Autovon termination, any PBX station that has been given proper class marking can originate precedence Autovon calls. The following dial pattern will be used to dial a precedence digit. The first digit must always be the precedence digit.
| DIGIT | PRECEDENCE |
|---|
| 0 | Flash Override |
| 1 | Flash |
| 2 | Immediate |
| 3 | Priority |
| 4 | Routine |
- Note that users must dial 4 to establish a routine call.
- Users can only originate a precedence level call as high as the Autovon circuit is graded for in the Autovon switching center.
Trunk options
| 1 | Trunk Type | Tie |
| 2 | Direction | Two Way |
| 3 | Com Type | Voice |
| 4 | Trunk Type | Auto / Auto |
| 5 | Dial Type | Tone In / Tone Out |
| 6 | Disconnect Time | 500mSec |
Specifications subject to change without notice.
Published on 4 April 2002.
| About us
| Contact us
| Home
| Legal stuff
| Products
|
