| ITEM |
DESCRIPTION |
 |
ADTK1 |
terminal software kit - for the AD100 and AD200 series dialers. Includes terminal software, MA26 interface cable, and setup examples on disk. Also works with the ARS100 and SDX64. |
 |
MA1 |
cable - 3ft length. 1/8" mini-phone plug to 1/8" mini-phone plug. For use with portable cassette recorders or similar devices with 1/8" jack. |
 |
MA2 |
cable - 3ft length. 3/32" submini phone plug to 3/32" submini phone plug. For use with portable recorders that have a remote start/stop input. |
 |
MA3 |
cable - 6ft length. 1/8" mini-phone plug to bare ends, solid 24AWG wire for terminating to punch block. |
 |
MA4 |
switch hook lead - 15" length. Pin jack to bare end. Fits M1010E and similar. |
 |
MA5 |
5vdc power supply - regulated wall plug-in power supply with 6ft output cord. 2.1 x 5.5mm plug size, outside positive, inside negative. Input 120vac, 60hz. Output 5vdc, 350mA. For the AD100, AD101, M1010E, M6500Pv5, MLX-VOX, RD-400, SD89, and SDX-64. |
 |
MA7 |
switch hook lead - 15" length, pin jack to pin jack. |
 |
MA8 |
cable - 6ft length. 1/8" mini-phone plug to RJ11 plug. Uses pair 1 only. |
 |
MA9 |
switch hook lead - 15" length. 2-wire pin jack to bare ends. Fits M6500's. |
 |
MA10 |
cable - 1ft length. Modular handset plug to bare ends, 4 conductor. |
 |
MA11 |
cable - 2ft length. Modular handset plug to modular handset plug. Non-coiled. Replaces handset cable on voice terminals for connection to M1050 or similar. |
 |
MA12 |
cable - 6ft length. Modular handset plug to RJ14 plug. |
 |
MA13 |
cable - 6ft length. Modular handset plug to 3/32" submini phone plug. Uses center pair only. |
 |
MA14 |
RS-232 cable - 6ft length. DB9 male to DB9 female, straight thru wiring. For connecting DCE devices such as the MLX-VOX and the VS100. This is NOT a null modem cable. |
 |
MA15 |
cable - 6ft length. 6-conductor RJ-25 plug to RJ-25 plug, reversed wiring. For the SDC110. |
 |
MA16 |
Y-cable - 6ft length. RJ14 plug, pair 1 to 1/8" mini-phone plug, pair 2 to 3/32" submini phone plug. For the 106AC and similar. |
 |
MA17 |
cable - 6ft length. 1/8" mini-phone plug to modular handset plug. Uses center pair only. |
 |
MA18 |
switch hook lead - 15" length. Single lead, pin jack to bare end. Fits the M6500Pv5. |
 |
MA20 |
cable - 3ft length. 1/8" mini-phone plug to RJ45 plug, pair 1. Fits the M6500Pv5. |
 |
MA21 |
cable - 14ft length. 6 conductor, RJ-25 modular plug on each end. This cable replaces the standard issue 2 conductor cable (D2R) on 4412D+ and 4424D+ sets when equipped with the MI4000. |
 |
MA22 |
modular T adapter - 4 conductor 6 position plug and two 6 conductor 6 position jacks wired in parallel. Allows power to be connected to the 4424LD+ set without interrupting the audio output when equipped with the MI4000. |
 |
MA23 |
12vdc power supply - regulated wall plug-in power supply with 6ft output cord. 2.1 x 5.5mm plug size, outside positive, inside negative. Input 120vac, 60hz. Output 12vdc, 200mA. For the CD10, E8050, and VS-100. |
 |
MA24 |
interface bridge - 50 pin female amphenol with 6ft cable to 104 type connecting block with 2 bridged 8 conductor 8 position jacks. For the VS-100. |
 |
MA25 |
Modular adapter (478B) - Converts handsets or headsets equipped with a modular plug to a double tip-sleeve plug. Fits standard jacks mounted on 5/8" centers. (The modular jack is located on the rear of the adapter.) |
 |
MA26 |
RS-232 cable - 6ft length. DB9 female to DB9 female, straight thru wiring. For the AD100 and AD101. This is NOT a null modem cable. Also works for the ARS100 and SDX64. |