Each T100 dual timer has 2 discrete timer circuits on a 56-pin, type 10 plug-in card. The T100 will operate from a 24 or 48vdc power supply. The trigger input requires 10 to 48vdc.
When a trigger voltage is applied to the T100, the timing sequence begins. After the preset time has elapsed, the relay activates. The relay remains active until the trigger source is removed, and then returns to its idle state. If the trigger source is removed before the preset time is reached, that timer is reset and the relay never operates. 2 LED’s on the front panel indicate if a relay is active or idle.
Each timer has a delay range of 1 to 1023 seconds (17 minutes 3 seconds). The delay time is set by a 10 position dip switch.
